LaserLight’s MediLaser is designed for simplicity, ease of use and portability. This self-contained, battery operated laser is intended for straightforward and cost-effective treatment. MediLaser has been conceived in Denmark for general laser therapy but especially with dental applications in mind.

MediLaser fits comfortably in the hand, is easily carried from one patient area to the next and is simple to operate with four built-in programs. MediLaser may be set at 500 mW or 250 mW, and dosimetry is easy with an acoustic signal every 10 seconds, indicating 5 Joules or 2.5 Joules. MediLaser can operate for roughly 60 minutes on a full charge, and recharging takes approximately 2 hours.

MediLaser is delivered as a standard kit in an aluminium case with a straight optical fibre tip, one battery, one battery charger with tester, one set of protective glasses and a user’s manual. A focus lens and a curved dental applicator are available as options, and either one of these may be substituted for the straight optical fiber tip at your request or included as an additional option.

LaserLight is based in Vejle, Denmark where founder Claus Broge Meyer has been involved in the design, manufacture and marketing of lasers and other innovative phototherapeutic instruments since 1996.

European clearance - CE0123 cleared by TÜV
US clearance - FDA cleared Class II device

Technical specifications of MediLaser:

• Weight of laser unit: 86 g
• Weight of laser unit with battery: 180 g Laser diode:
• Dimensions of laser unit: L: 100mm D: 34mm
• Dimensions with battery: L: 170mm D: 34mm
• Laser diode: Gallium-Aluminum-Arsenide, infrared, 808 nm, continuous wave (CW)
• Maximum output power: 500mW
• Optical output power: 475mW CW +/-5% in program A1 and A5
  225mW pulsed +/-5% in program F1 and F5
• Aiming beam: Two, red diodes, 650nm
• Laser classification: 3B
• Divergence (light dispersion at diode): Max. 9x45 degrees
• Divergence of straight light guide tip: Max. 75 degrees in circle
  Point of focus with convex lens is approximately 10mm from the lens tip.
• Dimensions of straight light guide tip: 8mm
• Divergence of curved dental applicator: Max. 9x45 degrees in circle
• Dimensions of curved dental applicator: 8mm
• Point of focus with convex lens: approximately 10mm from the lens tip.
• Adapter (desktop charger-US) input: 120V AC / 60 Hz / 4,6VA
• Adapter (desktop charger-US) output: 2,4-10V . DC / 125mA

For more information or if you have questions about our products or about laser therapy in general, contact us at (800) 558-2197.