Luminex® Laser Therapy System

Medical Laser Systems’ Luminex has proven itself in our own clinic and in a great many others since its development in 2002, providing reliable service for countless thousands of hours in often near continuous use. The Luminex design is an outgrowth of the Respond veterinary series and the result of more than 20 years experience in the manufacture of therapeutic lasers. Medical Laser Systems and Luminex have well-earned reputations for excellence in design, craftsmanship, quality of components and customer service.

Luminex is versatile and may be adapted to a great many applications. The base unit can be adjusted for output powers of 500, 250, 100 mW, and a 3 mm fiberoptic adaptor may be used to concentrate the beam for laser acupuncture, trigger point therapy, dental and other applications, reducing output to approximately half of the base unit’s power. Luminex is available with 867 nm infrared and 670 nm red, 500 mW laser probes. These laser diodes are high quality components capable of running at much higher powers and engineered for performance, durability and long life.

Should servicing be necessary during the warranty period, Medical Laser Systems promises to have your laser on its way back to you within 2 business days of its receipt, or a loaner will be provided at no charge. Our praise and appreciation are based upon years of working experience with Luminex and familiarity with a wide variety of therapeutic lasers. In the rare instance that service has been necessary, Medical Laser Systems has gone above and beyond. Highly recommended.

• Base Unit Power Settings: 500 mW, 250 mW, 100 mWo Probes: Gallium-Aluminum Arsenide infrared, 867 nm, and red. 670 nm, with a minimum output power of 500 mW as measured at the lens.
• Probe spot size: 1.04 cm2.
• Probe dimensions: 1.25" Diameter x 7" long.
• Power Meter: Accuracy within 2%. Allows one to check the probe's power output before beginning treatment.
• Dosimetry: An audible tone signifies each Joule of energy output, allowing easy and accurate measurement of the dosage delivered.
• Pulsing Mode: Users can choose from preset, extremely low frequencies - 2, 5, 8, 10, 20 Hz and Nogier frequencies - 73, 146, 292, 584, 1168, 2336, 4672, 9344 Hz.
• Pulse Width: When operated in pulsed mode, the beam is interrupted for 2 µsec. At the continuous wave setting, there is no pulse interruption.
• Laser Class: BRH Class IIIb.
• Power Supply: Wall mounted unit. Input: 120VAC @60Hz, 1.3A; Ouput:12VDC, 0.325A.
• Lithium Ion Batteries: Are used to power the portable version, permitting the therapist to move from place to place without having an electrical outlet available. The batteries last approximately 10 - 12 hours of use prior to needing recharge. The recharge takes place in approximately 8 hours.
• Two pair of safety goggles are provided: Blocking 99% of laser light between 904 and 670nm.
• Warranty: 1 year.
• FDA Clearance: Class II device.
• Optional LUCID Probe Tip: reduces laser aperture to 3 mm, concentrating the beam for point treatment and to reach small areas (Spot size = .07068 cm2). It reduces the power output approximately 50% from that set on the back of the base unit while concentrating the power density of the beam approximately seven fold.

Base unit settings Power Output (w/LUCID probe tip) 500 mW ~ 250 mW 250 mW ~125 mW 100 mW ~ 50 mW

• Optional Card Reader System: permits realistic sham treatments and double blinding.

Medical Laser Systems Pledge

"It is our pledge that upon receiving the laser equipment, it will remain in our office for no more than 2 business days before being shipped back to you. To meet this pledge, Medical Laser Systems, Inc. will either return your existing system to perfect working order within 2 business days or, if necessary, provide you with a loaner system at no extra charge."

For more information or if you have questions about our products or about laser therapy in general, contact us at: (800) 558-2197